 |
 |
 |
| Degreaser Cleaners | Electronic and Electrical Cleaners | Carbon Removers |
 |
 |
 |
| Aircraft Paint Strippers | Wheel Rim Strippers |
Solvent Kleene provides environmentally friendly non-hazardous degreasing and cleaning products and chemical paint powder coating strippers. All products are safe for use on most ferrous and non-ferrous metals, alloys such as aluminum and zinc, plastics, concrete, brick and glass. Solvent Kleene's degreasing products are designed as quick acting cold cleaners that offer high performance at room temperature without heating and provide fast drying. Designed for workplace safety, most Solvent Kleene degreaser cleaners are non-flammable and have no chlorinated components or hazardous air pollutants (HAP). Developed as eco safe, green replacements for conventional hazardous products, Solvent Kleene's degreaser cleaners include both mild solvent based and aqueous based products that can quickly penetrate and emulsify grease, oils and carbon deposits. Our chemical paint and powder coating strippers remove varnish, CARC paints, cross linked polyurethanes, autophoretic / autodeposition chemical coatings and E-coatings / electrocoatings. Solvent Kleene offers immersion, spray and gel strippers for removing paint from aircraft and aircraft components such as landing gear, landing gear components and wheels. Aircraft strippers meet the stringent requirements of industry standards including Boeing D6-17487M and USAF 83936C. Solvent Kleene also has products for removing inks from anilox rolls used by the printing industry and non-hazardous chemical removers for stripping paint and powder coatings for magnesium and aluminum wheel restoration.
Paint Remover and Powder Coating Stripper Selection
Solvent Kleene's D-Zolve non methylene chloride, environmentally preferred paint strippers and coating removers are designed to strip and remove powder coatings, electrocoatings, aircraft paints (such as cross linked polyurethane top coats with epoxy primer), CARC paints and marine fiberglass paints. These products are used for stripping powder coated ferrous and non-ferrous metals, stripping powder coated aluminum and powder coated zinc, stripping powder coated aluminum zinc alloys and for stripping paint from aluminum, zinc, magnesium and other non-ferrous metals. D-Zolve depainting and powder coating stripping products can be used in an immersion tank or applied to a substrate using a brush or airless spray equipment. Powder coatings, autophoretic and E-coatings can be removed from aluminum, zinc, stainless steels, carbon steels, magnesium, fiberglass and plastic surfaces. D-Zolve 338 is a special formulation designed to remove solvent based, water based or UV based dry ink build up. The charts below will help you select the most suitable stripper for your stripping and paint removal application. For a free sample or complimentary testing of your parts contact one of our application engineers at 978-531-2279 or sales@solventkleene.com.
| Stripping Product | Immersion | Brush or Spray | Water Dilutable | Stripping Temperature |
|---|---|---|---|---|
| D-Zolve 1012 | Yes | – | – | ambient |
| D-Zolve 917 | Yes | – | Yes | 140°F/60°C |
| D-Zolve 15-33 IM | Yes | – | – | 135°F/57°C |
| D-Zolve 338 | Yes | – | – | 70°F/21°C or over |
| D-Zolve 3251 | Yes | – | – | 150°F/65°C or over |
| D-Zolve 1220 | – | Yes | – | 70°F/21°C or over |
| D-Zolve 15-33R | – | Yes | – | 70°F/21°C or over |
| Stripping Application | D-Zolve 1012 |
D-Zolve 917 |
D-Zolve 15-33 IM |
D-Zolve 338 |
D-Zolve 3251 |
D-Zolve 1220 |
D-Zolve 15-33R |
|---|---|---|---|---|---|---|---|
| Powder Coatings | Yes | Yes | Yes | – | – | Yes | Yes |
| Electrocoatings | Yes | Yes | – | – | – | Yes | Yes |
| Aircraft Paints | – | Yes | Yes | – | – | Yes | Yes |
| Wet Paint | Some | Yes | Yes | Yes | Yes | Yes | Yes |
| Fiberglass Paints | – | Yes | – | – | – | Yes | – |
| Dry Ink Removal | – | – | – | Yes | - | – | – |
| Plastics | – | – | – | - | Yes | – | – |
Typical Uses
Plastic coated paint removing
Degreasing and Cleaning Product Selection
Solvent Kleene offers a range of safe solvent based and water-based D-Greeze products designed to safely remove grease, oil, flax and grime from metal surfaces. D-Greeze environmentally friendly metal cleaners and degreasers are non-hazardous, non-air polluting (non HAP), non-chlorinated, and non-flammable. They are designed as high performance quick acting cleaner and degreasers. For exceptionally fast drying applications lower flash point products are available. The D-Greeze family of products addresses non-flammable drying requirements, fast drying needs, and air blow off drying applications. D-Greeze oil, grease, flax and grime removers are heavy-duty industrial strength products that can be used with immersion tanks and ultra sonic systems or used to clean the surface using either aerosol spray, wand spray or rag wipe off. All degreaser cleaner products are compatible with all ferrous and non-ferrous metals. The chart below will help you select the most suitable degreaser cleaner for your application. In addition, Solvent Kleene offers products for removing combustion related carbon deposits and burnt on engine oil. For a free sample or complimentary testing of your parts contact one of our application engineers at 978-531-2279 or sales@solventkleene.com.
| Cleaning Product | D-Greeze 500 | D-Greeze ES-150D | D-Greeze ES | D-Greeze 1000 | D-Greeze 2603 |
|---|---|---|---|---|---|
| Solvent Based | Yes | Yes | Yes | Yes | – |
| Surfactant Based | – | – | – | – | – |
| Water Based | – | – | – | – | Yes |
| Very Fast Drying | – | Yes | Yes | – | – |
| Quick Drying | – | Yes | Yes | Yes | – |
| Rinsing Needed | – | – | – | – | Yes |
| Air Blow Dry | Yes | Yes | Yes | Yes | After Rinse |
| Dilutable | – | – | – | – | Yes |
| Heavy Duty | Yes | Yes | Yes | Yes | Yes |