D-Greeze ES Degreaser/Cleaner for Fast Drying Applications

	Non-Flammable Faster Drying Than Most Safe Products Does Not Require Special Equipment D-Greeze™ ES is a safe cleaner/degreaser specially designed for applications where quick drying of parts and component surfaces is necessary. Drying time is comparable to that of Trichloroethane without any of the hazards and no organic residue. It does not contain any flammable components and has no flash point. It does not contain any Methylene Chloride, Carbon Tetrachloride, Phenols or Phosphates. D-Greeze ES also does not contain any HCFCs, Benzene or aromatic components. Easy-to-Use D-Greeze ES's cleaning efficiency per ASTM 121, 122 is 100%. It can be used for spray or immersion applications or with wipes. D-Greeze ES has a very low surface tension, under 26 dynes/cm2 at 25°C, which allows it to penetrate very small orifices, cracks and blind holes. It has no water content, no pH, and can be recycled. Environmentally Safe Environmentally safe, D-Greeze ES has a low ozone depleting potential of .002 and a low global warming potential of .31 and HCFC of 170. It has a limited atmospheric lifetime of approximately 15 days and HCFC of 2 7-8 years. MIL Spec and Aircraft Approved Suitable for cleaning to MIL spec and aircraft standards, D-Greeze ES complies with sandwich corrosion in accordance with ASTM F1110 and Boeing D6-17487R1. It also complies with MIL C-2515E, Class 1-1A for aluminum, steel and magnesium. Components are SNAP approved for sale. D-Greeze ES is available in 5-gallon pails and 55-gallon drums. It is also available in aerosol cans (minimum quantities required).