Nonhazardous Products

 

subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link
subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link
subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link
subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link
subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link
subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link
subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

 

D-Zolve 1012 Paint, A-Coating, E-Coating and Powder Coating Stripper and Remover


Click for video

  • Performs at Room Temperature
  • Fast Acting and Long Lasting
  • Non-Flammable
  • No Ozone Depleting Potential
  • No Air Pollution Potential
  • D-Zolve 1012 is a paint and powder coating stripper and remover designed to efficiently strip hard-to-remove powder coatings, autophoretic / autodeposition chemical coatings and electrocoatings from intricate part shapes. It is used in an immersion tank at room temperature eliminating the need for heating. Additionally, waste solids can be filtered out to prolong the useful life of the solution.

    Compatibility
    D-Zolve 1012 is compatible with most metals and plastics. It safely removes powder coatings from galvanized steel, aluminum, zinc, copper, brass, carbon steel and stainless steel as well as most plastic and silicone substrates.

    Fast Acting
    D-Zolve 1012 is a fast acting powder coating remover. Stripping times typically range from 30 minutes or less to 1-2 hours. Factors which determine the stripping time required are thickness, uniformity and type of powder coating. Ambient temperature also effects the time required to remove the coating, the higher the ambient temperature, the less time required. An ambient temperature of 68°F/20°C is sufficient.

    D-Zolve 1012 penetrates several layers of a coating to break the bond between the metal or plastic substrate and the paint. At the same time, it reduces the coating to its powder particles. The solid particles drop to the bottom of the immersion tank while the pigment dye may remain suspended in the D-Zolve solution.

    Easy to Use
    D-Zolve 1012 is designed for use in an immersion tank at room temperature. It does not require any blasting, scrubbing or scraping to facilitate stripping, however, agitation is recommended. Agitation can be achieved by either having a parts basket move in an up and down motion or by circulating the the liquid to generate friction with the parts. Agitation also helps prevent the dissolved paint from lingering on parts. Once parts are removed from the tank, any remaining residue should be rinsed off with pressurized water.

    Prolonged Service Life
    To minimize loss through evaporation D-Zolve 1012 is designed to evaporate very slowly. Its useful life can be further extended by keeping the tank covered and periodically filtering out solid particles that result from the stripping process.

    Safety and Environmental
    Eco friendly D-Zolve 1012 is non-flammable, does not contain known carcinogenic components and has no hazardous air pollutant potential. It is readily biodegradable and contains no ozone depleting components. It is recommended that chemical resistant goggles or face shield and nitrile, or similar chemical resistant gloves, be employed.


       
       
     

     

     
     
     
     
     
     

     

    Home | History | Contact Us | ©2016 Solvent Kleene, Inc.