Nonhazardous Products

 

subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link
subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link
subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link
subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link
subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link
subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link
subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

 

D-Zolve 339 Carbon Remover




  • Dissolves carbon deposits produced by engine combustion
  • Dissolves carbon deposits produced by firearms combustion
  • Dissolves burnt-on oils
  • Non-Flammable
  • Non-Corrosive
  • Performs at room temperature
  • No chlorinated components
  • D-Zolve 339 is industrial grade carbon remover, designed to dissolve carbon and burnt oil deposits produced by engine combustion. 
    D-Zolve 339 also dissolves carbon deposits produced by firearms soiling the barrels rifling.
    Engines parts can be placed in immersion tank for soaking and brushing off carbon residue.

    Removing Deposits with D-Zolve 339
    When Parts are placed in an immersion tank, D-Zolve 339 will dissolve and emulsify the burnt-on oils and carbon de- posits. Adding agitation to the immersion tank significantly accelerates the cleaning process. Any remaining deposits in narrow, difficult to reach spaces can be removed using a nylon brush. D-Zolve 339 breaks the chemical bond between the deposits left following combustion and the metal substrate.
    Devoid of any water content, it will not promote oxidation.
    Firearms can be placed in a soaking tank followed by standard cleaning of barrels rifling.

    Minimizes Health and Safety Hazards
    D-Zolve 339 is designed to minimize health and safety hazards. It contains no halogens and no CFCs. It is non-flammable, non-corrosive, and non-ozone depleting.

    A Safe Workplace
    When placing parts into an immersion tank, or removing them, proper protective gear should be worn. Goggles to protect eyes from splashes, gloves to protect hands, and a smock or apron to prevent clothing from getting wet are recommended. Tank should be covered at all times to inhibit evaporation. Read the SDS prior to use.

       
     

     

       
       
       
       
       
       

     

    Home | History | Contact Us | ©2016 Solvent Kleene, Inc.