Nonhazardous Products

 

subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link | subglobal1 link
subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link | subglobal2 link
subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link | subglobal3 link
subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link | subglobal4 link
subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link | subglobal5 link
subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link | subglobal6 link
subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link | subglobal7 link
subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link | subglobal8 link

 

D-Zolve Chemical Agent Resistant Coating "CARC" Stripper and Remover



  • Fast Acting at Low Temperature
  • Non-Flammable
  • Non-Toxic
  • Compatible with Most Metals
  • Water Dilutable Concentrate
  • D-Zolve CARC Remover is a fast acting, safe paint and powder coating stripper that will strip the Mil Spec Chemical Agent Resistant Coating referred to as “CARC”. Designed for use in an immersion tank at low temperatures, D-Zolve removes paints and powder coatings by penetrating the cured layers and breaking the bond between the coating and the substrate. D-Zolve eliminates the need for costly burn-off, blasting or heating to high temperatures.

    Easy-to-Use
    D-Zolve’s unique properties enable it to penetrate several layers of a coating when parts are immersed in the solution. D-Zolve softens the finish layer, breaking the chemical bond that adheres these layers to the substrate's surface and causing the layers to delaminate and fall to the bottom of the tank.

    While many strippers require heating to temperatures as high as 200°F to be effective, D-Zolve CARC Remover needs a maximum temperature of 135-140°F. It eliminates the need for higher energy consumption, high temperature heating and costly, time-consuming removal processes such as sand or shot blasting and burn-off.

    D-Zolve is able to quickly remove cross-linked coatings, epoxy primers, polyurethane topcoats, powder coatings and other difficult to remove coatings without requiring any additional steps. Heating to 140°F and agitation of the D-Zolve solution can be used to facilitate the removal of difficult to strip coatings.

    D-Zolve CARC Remover can be diluted with water or used as a concentrate. Solids that drop to the bottom of the tank can be filtered out to extend the solution's useful life. Diluting and filtering reduces replenishment costs.

    Health and Safety
    Designed to minimize both health and environment risks, D-Zolve CARC Remover is non-flammable, non-toxic and non-carcinogenic. D-Zolve CARC Remover does not contain any ozone depleting components.

    Compatibility

    D-Zolve can be used on a wide range of painted ferrous and non-ferrous metals including: aluminum, copper, brass, stainless steel and carbon steel as well silicone substrates. D-Zolve strips difficult to remove CARC powder coatings that meet MIL-DTL-53072 requirements and CARC liquid paints that meet MIL-STL-53072 requirements.



       
       
     

     

     
     
     
     
     
     

     

    Home | History | Contact Us | ©2016 Solvent Kleene, Inc.