Paint Remover and Powder Coating Stripper Selection

Solvent Kleene's D-Zolve environmentally preferred paint strippers and coating removers are designed to strip and remove powder coatings, electrocoatings, aircraft paints (such as cross linked polyurethane top coats with epoxy primer) and marine fiberglass paints. These products are used for stripping powder coated ferrous and non-ferrous metals, stripping powder coated aluminum and powder coated zinc, stripping powder coated aluminum zinc alloys and for stripping paint from aluminum, zinc, magnesium and other non-ferrous metals. D-Zolve depainting and powder coating stripping products can be used in an immersion tank or applied to a substrate using a brush or airless spray equipment. Powder coatings and E-coatings can be removed from aluminum, zinc, stainless steels, carbon steels, magnesium, fiberglass and plastic surfaces. D-Zolve 338 is a special formulation designed to remove solvent based, water based or UV based dry ink build up. The charts below will help you select the most suitable stripper for your stripping and paint removal application. For a free sample or complimentary testing of your parts contact one of our application engineers at 978-531-2279 or sales@solventkleene.com.

Stripping Product Immersion Brush or Spray Water Dilutable Stripping Temperature
D-Zolve 1012 Yes No No ambient
D-Zolve 917 Yes No Yes 140°F/60°C
D-Zolve 338 Yes No No 70°F/21°C or over
D-Zolve 15-33 IM Yes No No 135°F/57°C
D-Zolve 3251 Yes 150°F/65°C or over
D-Zolve 1220 No Yes No 70°F/21°C or over
D-Zolve 15-33R No Yes No 70°F/21°C or over

 

Stripping Application D-Zolve
1012
D-Zolve
917
D-Zolve 338 D-Zolve 15-33 IM D-Zolve 3251 D-Zolve
1220
D-Zolve
15-33R
Powder Coatings Yes Yes No No Yes No
Electrocoatings Yes Yes No No Yes No
Aircraft Paints No Yes No Yes Yes Yes
Wet Paint Some Yes Yes Yes Yes Yes Yes
Fiberglass Paints No Yes No No Yes No
Dry Ink Removal No No Yes No No No
Plastics Yes

Back to Industrial Paint Strippers