D-Zolve 1012 Room Temperature Cold Process Paint, E-Coating and Powder Coating Stripper
D-Zolve 1012 is a chemically energized paint and powder coating stripper and remover designed to efficiently strip hard-to-remove paints, varnish, powder coatings, autophoretic / autodeposition chemical coatings and E-coatings / electrocoatings from intricate part shapes without the need for heating the stripping solution. Designed as a cold process immersion tank paint stripper and remover it penetrates and delaminates paints and coating at room temperature for easy removal. Additionally, waste solids can be filtered out of the tank to prolong the useful life of the solution. D-Zolve 1012 is a green paint stripper and remover that uses chemical energy instead of electrical energy to remove coatings. Compatible with most metals and plastics, it safely removes paints, powder coatings, A-coatings and E-coatings from galvanized steel, aluminum, zinc, copper, brass, carbon steel and stainless steel as well as silicone substrates. An eco-friendly paint stripper and remover, it is non-flammable and has no ozone depleting or air pollution potential.

Data Sheet      MSDS      Free Sample      Product Selector

D-Zolve 917 Low Temperature Paint, Electrocoating and Powder Coating Stripper
D-Zolve 917 is a fast acting chemical paint, varnish, powder coating, autophoretic / autodeposition and E-coating / electrocoating stripper and remover designed to be used at low temperatures (140°F/60°C) in an immersion tank. It is able to quickly penetrate and break the bond between the coating's layers and the substrate, eliminating the need for costly, time consuming burnoff, blasting or heating of the solution to high temperatures. Developed as a green, eco-stripper and remover, D-Zolve 917 is non-flammable, non-toxic and does not contain any ozone depleting components or carcinogenic compounds. It provides safe stripping of paints and coatings from ferrous and non-ferrous metals including aluminum, copper, brass, stainless steels and carbon steels as well as plastic and silicon substrates.

NSN 8010-01-579-8893

Data Sheet      MSDS      Free Sample       Product Selector

D-Zolve 1220 High Viscosity Paint, Powder Coating and E-Coating Stripper
D-Zolve™ 1220 is a high viscosity (HV) is a green paint and coating stripper and remover for ferrous and non-ferrous metals. It is designed to be applied either with airless spray-on equipment or as a brush-on paint stripper and remover. Developed as a safe eco-stripper, this fast acting chemical stripper removes paint and varnish, aircraft paints, autophoretic / autodeposition chemical coatings, powder coatings, A-coatings and E-coatings / electrocoatings from fiberglass, aluminum, steel, galvanized steel and other metal and plastic substrates. D-Zolve 1220 HV is a quick acting, industrial grade replacement for chlorinated and other hazardous stripping solvents. Application of D-Zolve does not require any costly equipment such as burn-off or blasting systems and does not result in the need for wastewater treatment, dust-control, or air scrubbing equipment.

Data Sheet      MSDS      Free Sample       Product Selector

D-Zolve 3251 Paint and Powder Coating Stripper for Plastics
Safely strips paints, powder coatings, top coats and other surface finishes from plastic substrates allowing a defective or damaged surface finish to be stripped from plastic components. Rather than scrap a plastic component in need of surface rework, D-Zolve 3251 strips paints and coatings from Polycarbonates, ABS, TPO, Nylon and other resins, rendering a clean surface for rework while maintaining the integrity of the part’s molded plastic surface. Surface finishes can be stripped without the need for expensive equipment or processes. Developed for use in immersion tanks, the D-Zolve 3251 stripping solution provides an eco friendly, cost effective means for removing base coats and clear top coats. Unlike many other stripping products and processes that require expensive specialized equipment or consume large amounts of energy for heating, D-Zolve 3251 is designed to keep equipment investment and energy consumption to a minimum. D-Zolve 3251 contains no halogens or air pollutants and is non-carcinogenic and non-flammable.

Data Sheet      MSDS      Free Sample