- Quick Acting and Fast Drying
- No Heating Required
- Quickly Penetrates and Emulsifies Soils
D-Greeze™ ES-LO Degreaser/Cleaner
D-Greeze ES-LO was designed for applications which require high cleaning performance and rapid drying, but without flammability. Unlike conventional solvents which have low flash points and are flammable, D-Greeze ES-LO features no flash point. D-Greeze ES-LO is a breed of high performance degreaser/cleaner that promotes a safer workplace
In addition D-Greeze ES-LO is not listed as a hazardous air pollutant or considered a class 1 or 2 ozone depletant. It is not regulated as flammable by DOT. It is a natural replacement for chlorinated solvents and eliminates the need for heating. D-Greeze ES-LO quickly evaporates from the surface after cleaning so there is no need for drying equipment.
D-Greeze ES-LO offers a unique combination of properties. It combines both a low surface tension with a high KB value, enabling it to quickly penetrate narrow orifices and complex part geometries to dissolve soils. It is efficient in removing oils, flux, grease and other soils.
D-Greeze ES-LO is ideally suited for degreasing/cleaning difficult to reach surfaces such as intricate part shapes and the inner surfaces of blind holes and tubes.
D-Greeze ES-LO is suitable for use with all ferrous and nonferrous metals, including titanium, zinc, magnesium, aluminum, copper, stainless steel and carbon steel and is a drop in replacement for most any degreaser/cleaner.
It is compatible with most existing degreasing methods and equipment. This includes immersion tanks with or without agitation, non-atomizing spray wash systems. Efficient cleaning of tubes and pipes is accomplished by flushing the degreaser through the tube or pipe.
D-Greeze ES-LO has a non-offensive minimal odor. It contains no ozone depleting components, no hazardous air pollutants or any SARA listed components. It is non-carcinogenic and non-toxic.
D-Greeze ES-LO aggressively penetrates and emulsifies oils and greases on metal surfaces. No heating is required. Agitation of the degreaser or the parts will reduce cleaning time. When agitated, oils and greases become emulsified so when parts are removed they are not recontaminated.